Theses items are to used in conjunction with MI-FLEX multi fuel flexible flue liner. Building Regulations Document J requires that a flexible flue liner can only be installed completely enclosed inside a masonry chimney. A non masonry enclosure such as timber or plasterboard boxing in is not acceptable. All items are suitable for use on appliances up to 600°C (T600 designation). Suitable for use on Wood <20% moisture, Smokeless coal, Gas and oil.
Installation kits are a complete package designed to give you all you need to install a flue liner in a specific scenario. MI-FLEX not included.
Use this pack when you DO NOT want to remove the existing chimney pot.
1 x Terracotta Pot Hanging Cowl with Mesh – Ø 125mm
1 x Nose Cone – Ø 125mm
1 x Increasing Adaptor to Black Pipe or Single Wall Flue – Ø 100mm SW to Ø 125mm Flex
1 x Chimney Notice Plate
The chimney system must be designed to allow for easy provision for sweeping and maintenance. Sweeping must be carried out by competent person. On solid fuel applications a list of HETAS registered sweeps can be found at www.hetas.co.uk. under no circumstances should chemical cleaners or mild steel tools be used to sweep stainless steel chimneys. Cleaning and inspection of the chimney system should be carried out at least once a year, along with maintenance of the appliance, but it is recommended that chimneys serving solid fuel appliances be swept at least twice a year, at the end of the heating season to remove any deposits, which may have built up during the season, and at the start of the next heating season to check for any blockages or deposits. I.e. birds nets.
|Item||Installation Pack No 508 – Ø 100-Ø 125|
|Designation:||BSEN 1856-2 T600 N1 W V2 L50012 G|
|System:||MI-FLEX Accessories MF20|
|Colour Finish:||Natural / Stainless Steel|
|Fuels:||Wood, Oil, Gas, Smokeless coal|
|Approvals:||HETAS / CE|